Model | YICT-225 | YICT-306 | YICT-408 | YICT-800 | YICT-1000 | ||
Inner chamber size W×H×D(CM) | 50×75×60 | 60×85×60 | 50×85×80 | 100×100×80 | 100×100×100 | ||
Exterior chamber size W×H×D(CM) | Depend on inner chamber size | ||||||
Testing temperature range | -70~150℃(KS);-40~150℃(KL);-20~150℃(KR) | ||||||
Fast change temperature range | -70℃:-50~+8℃(KS);-40℃:-20~+85℃(KS);-20℃:0~+85℃(KS); | ||||||
Heating-up & cooling-down speed | 3℃/min,5℃/min,8℃/min,10℃/min,15℃/min(Linear or Non-liner) | ||||||
Performance | Temp. fluctuation | ±0.2℃ | |||||
Temp. uniformity | ±1.5℃ | ||||||
Temp. resolution | 0.01℃ | ||||||
Heating-up time | -70~150℃<60min;-40~150℃<50min;-20~150℃<35min | ||||||
Cooling-drow time | +20~-70℃<70min;+20~-40℃<55min;+20~-20℃<35min | ||||||
Material | Exterior chamber material | Cold-rolled steel with powder coating | |||||
Interior chamber material | SUS#304 Stainless steel | ||||||
Insulation material | PU fiberglass wool | ||||||
System | Wind circulation | Cooling fan | |||||
Heating system | SUS#Stainless steel high-speed heater | ||||||
Refrigeration system | Imported Tecumseh compressor+Fin type evaporator+air(water)cooling system | ||||||
Other components | Multi-layer vacuum glass observation window,cable port(50mm),controlling status indicator lamp,chamber light,specimen loading shelf(2pcs,position adjustable) |
||||||
Safety protection device | Over-heat protection circuit breaker,compressor overload protection,control system overload protection,humidifying system overload protection,overload indicator lamp |
||||||
Power supply | AC 3phase 380V 60/50Hz | ||||||
Customization service | Non-standard or special requirements are all welcome |
Model | YICT-225 | YICT-306 | YICT-408 | YICT-800 | YICT-1000 | ||
Inner chamber size W×H×D(CM) | 50×75×60 | 60×85×60 | 50×85×80 | 100×100×80 | 100×100×100 | ||
Exterior chamber size W×H×D(CM) | Depend on inner chamber size | ||||||
Testing temperature range | -70~150℃(KS);-40~150℃(KL);-20~150℃(KR) | ||||||
Fast change temperature range | -70℃:-50~+8℃(KS);-40℃:-20~+85℃(KS);-20℃:0~+85℃(KS); | ||||||
Heating-up & cooling-down speed | 3℃/min,5℃/min,8℃/min,10℃/min,15℃/min(Linear or Non-liner) | ||||||
Performance | Temp. fluctuation | ±0.2℃ | |||||
Temp. uniformity | ±1.5℃ | ||||||
Temp. resolution | 0.01℃ | ||||||
Heating-up time | -70~150℃<60min;-40~150℃<50min;-20~150℃<35min | ||||||
Cooling-drow time | +20~-70℃<70min;+20~-40℃<55min;+20~-20℃<35min | ||||||
Material | Exterior chamber material | Cold-rolled steel with powder coating | |||||
Interior chamber material | SUS#304 Stainless steel | ||||||
Insulation material | PU fiberglass wool | ||||||
System | Wind circulation | Cooling fan | |||||
Heating system | SUS#Stainless steel high-speed heater | ||||||
Refrigeration system | Imported Tecumseh compressor+Fin type evaporator+air(water)cooling system | ||||||
Other components | Multi-layer vacuum glass observation window,cable port(50mm),controlling status indicator lamp,chamber light,specimen loading shelf(2pcs,position adjustable) |
||||||
Safety protection device | Over-heat protection circuit breaker,compressor overload protection,control system overload protection,humidifying system overload protection,overload indicator lamp |
||||||
Power supply | AC 3phase 380V 60/50Hz | ||||||
Customization service | Non-standard or special requirements are all welcome |